Evaluation of the Digital Elevation Model from the Shuttle Radar Topography Mission (SRTM) on the Papaloapan Macro-Basin, Mexico, using LiDAR as benchmark

Autores/as

DOI:

https://doi.org/10.24850/j-tyca-2024-04-05

Palabras clave:

SRTM, Digital Elevation Model, DEM, LiDAR, Papaloapan Basin, Evaluation of INEGI products, Composite DEM, multi-source DEM

Resumen

The Digital Elevation Model (DEM) from the Shuttle Radar Topography Mission (SRTM) is evaluated using a LiDAR DEM from INEGI as benchmark in the Papaloapan Basin (~58 000 km2) in Mexico. Three representative regions are selected: 1) a hilly region with strong slopes and elevations over 3 000 m; 2) a transitional region with relatively smoother slopes and elevations around 1 000 m, and 3) a floodplain with flat terrain and elevations below 100 m. The straight comparison of both datasets shows very similar elevation values at the hilly and transitional regions. However, in the floodplain, the relationship has a parabolic shape, and errors are relatively higher, in terms of the elevation range. This is probably due to systematic errors in SRTM being very close to the actual low elevations. Maps of errors suggest strong association with water bodies and the aspect. For example, in the transitional region, most negative errors are found on slopes facing east, while positive errors are found on slopes facing west. Three-dimensional histograms of errors vs. topographic features (elevation, slope, and aspect) are estimated. The histograms suggest a systematic error, which means SRTM could be improved with a simple calibration at least in these cases. Evaluations of public DEMs from different sources in Mexico are considered necessary for the identification of their strengths and weaknesses. We believe these evaluations might provide the grounds for the creation of improved MEDs in the future either by either a simple calibration or through composite MEDs from multiple sources.

Citas

Baghdadi, N., Cavelier, S., Chiles, J. P., Bourgine, B., Toutin, T., King, C., Daniels, P., Perrin, J., & Truffert, C. (2005). Merging of airborne elevation data and Radarsat data to develop a Digital Elevation Model. International Journal of Remote Sensing, 26(1), 141-166. DOI: 10.1080/01431160410001709020

Bater, C. W., & Coops, N. C. (2009). Evaluating error associated with lidar-derived DEM interpolation. Computers & Geosciences, 35(2), 289-300. DOI: 10.1016/j.cageo.2008.09.001

Gesch, D., & Wilson, R. (2001). Development of a seamless multisource topographic/bathymetric elevation model of Tampa Bay. Marine Technology Society Journal, 35(4), 58-64. DOI: 10.4031/002533201788058062

Goulden, T., Hopkinson, C., Jamieson, R., & Sterling, S. (2016). Sensitivity of DEM, slope, aspect and watershed attributes to LiDAR measurement uncertainty. Remote Sensing of Environment, 179 (Suppl. C), 23-35. DOI: 10.1016/j.rse.2016.03.005

INEGI, Instituto Nacional de Estadística y Geografía. (2017). Modelo digital de elevación de alta resolución LiDAR, Tipo terreno con resolución de 5 m. Recovered from http://www.inegi.org.mx/geo/contenidos/datosrelieve/continental/presentacion.aspx

Jarvis, A. G. E., Reuter, H. I., & Nelson, A. D. (2008). Hole-filled SRTM for the globe: Version 4: Data grid. Recovered from http://srtm.csi.cgiar.org/

Uribe-Alcantara, E. M., Escamilla-Casas, J. C., & Cruz-Chavez, E. (2018). Evaluación del modelo de elevación digital oficial mexicano (continuo de elevación mexicano, CEM 3.0) de INEGI. Tecnología y ciencias del agua, 9(6), 153-172. DOI: 10.24850/j-tyca-2018-06-07

Descargas

Publicado

2023-01-27

Cómo citar

Uribe, E. M., Escamilla, J. C., & Juárez, A. (2023). Evaluation of the Digital Elevation Model from the Shuttle Radar Topography Mission (SRTM) on the Papaloapan Macro-Basin, Mexico, using LiDAR as benchmark. Tecnología Y Ciencias Del Agua, 15(4), 194–219. https://doi.org/10.24850/j-tyca-2024-04-05

Número

Sección

Artículos

Artículos similares

1 2 3 4 5 6 7 8 9 10 > >> 

También puede Iniciar una búsqueda de similitud avanzada para este artículo.