Comparación de uno y dos arietes hidráulicos en paralelo con suministro vertical-radial
DOI:
https://doi.org/10.24850/j-tyca-2024-03-04Palabras clave:
arietes hidráulicos, bombas, golpe de ariete, flujo inestable, sistema de bombeoResumen
Mediante datos experimentales se analiza y compara el comportamiento de uno y dos arietes hidráulicos en paralelo con y sin bajante (adición a la conducción de entrega), y suministro descendente vertical-radial. El estudio se hizo en un circuito hidráulico configurable para que esos dispositivos operen de una u otra forma a altura de entrega constante y altura de suministro variable. Con cada altura de suministro se midieron los caudales suministrados y bombeados por los arietes hidráulicos, y la presión en la tubería de impulsión ―cerca de cada ariete― en la cámara de aire y en la tubería de entrega. Esta información permitió comparar por primera vez el desempeño de arietes hidráulicos funcionando solos o en paralelo mediante el análisis de caudales, presiones, frecuencia del golpe y eficiencia de los dispositivos. Como las bombas radiales, los resultados indican que dos arietes hidráulicos en paralelo entregan más que uno, pero menos que la suma del caudal bombeado por cada uno con descarga independiente. En el rango de alturas de suministro ensayado, la frecuencia del golpe de ariete y el caudal bombeado crecen con la altura de suministro, como se reporta en otros estudios. No obstante, el resultado más destacado es el efecto del bajante, porque incrementa varias veces el caudal bombeado al aumentar la frecuencia del golpe de ariete. Esta investigación impulsa el desarrollo de un sistema de múltiples arietes hidráulicos con suministro común, y descargas en paralelo o individuales para bombear más que con los diseños actuales.
Citas
Alrikabi, N. Kh. M. A. (2014). Renewable energy types. Journal of Clean Energy Technologies, 2(1), 61-64.
Arangurí-Cayetano, D. J. (2018). Efectividad del sistema de bombeo con ariete hidráulico en la zona rural de la provincia de San Pablo-Cajamarca (tesis de doctorado). Universidad Nacional de Cajamarca. Recuperado de https://repositorio.unc.edu.pe/bitstream/handle/20.500.14074/2138/Efectividad%20del%20Sistema%20de%20Bombeo%20con%20Ariete%20Hidr%C3%A1ulico%20en%20la%20Zona%20Rural%20de%20La%20Provincia%20de%20San%20P.pdf?sequence=1&isAllowed=y
Arapa-Quispe, J. B. (2016). Evaluación del rendimiento del ariete hidráulico Bah-1.1/2 variando la longitud de la tubería de alimentación y condiciones de operación de la válvula de impulso. Anales Científicos, 77(2), 155. DOI: https://doi.org/10.21704/ac.v77i2.485
Cahill, A. E., Aiello-Lammens, M. E., Caitlin-Fisher-Reid, M., Hua, X., Karanewsky, C. J., Ryu, H. Y., Sbeglia, G. C., Spagnolo, F., Waldron, J. B., Warsi, O., & Wiens, J. J. (2013). How does climate change cause extinction? Proceedings of the Royal Society B: Biological Sciences, 280(1750). DOI: https://doi.org/10.1098/rspb.2012.1890
Credo, M. C., & Metra, D. P. (2020). Design analysis, installation and performance evaluation of a hydraulic ram pump system with a modified waste valve. Vietnam Journal of Science and Technology, 58(1), 107.
De-Carvalho, M. O. M., Diniz, A. C. G. C., & Neves, F. J. R. (2011). Numerical model for a hydraulic ram pump. International Review of Mechanical Engineering, 5(4), 733-746.
DTU. (1996). New developments in hydraulic ram pumping. Recuperado de https://warwick.ac.uk/fac/sci/eng/research/grouplist/structural/dtu/pubs/tr/lift/rptr13/
El Zein, A. L., & Chehayeb, N. A. (2015). The effect of greenhouse gases on Earth’s temperature. International Journal of Environmental Monitoring and Analysis, 3(2), 74. DOI: https://doi.org/10.11648/j.ijema.20150302.16
Filipan, V., Virag, Z., & Bergant, A. (2003). Mathematical modelling of a hydraulic ram pump system. Strojniski Vestnik/Journal of Mechanical Engineering, 49(3), 137-149.
Ghidaoui, M. S., Zhao, M., McInnis, D. A., & Axworthy, D. H. (2005). A review of water hammer theory and practice. Applied Mechanics Review, 58(1), 49-76. DOI: https://doi.org/10.1115/1.1828050
Girish, L. V., Naik, P., Prakash, H. S. B., & Kumar, M. R. S. (2016). Design and fabrication of a water lifting device without electricity and fuel. International Journal on Emerging Technologies, 7(2), 112-116.
Glover, P. B. M. (1994). Computer simulation and analysis methods in the development of the hydraulic ram pump. Coventry, UK: University of Warwick.
IDRC-MR102eR. (1986). Proceedings of a Workshop on Hydraulic Ram Pump (Hydram) Technology. Ottawa, Canadá: Centro Internacional de Investigaciones para el Desarrollo.
Iversen, H. W. (1975). An analysis of the hydraulic ram. Journal of Fluids Engineering, Transactions of the ASME, 97(2), 191-196. DOI: https://doi.org/10.1115/1.3447251
Jafri, M., & Sanusi, A. (2019). Analysis effect of supply head and delivery pipe length toward the efficiency hydraulic ram 3 inches. International Research Journal of Advanced Engineering and Science, 4(2), 263-266.
Januddi, F. S., Huzni, M. M., Effendy, M. S., Bakri, A., Mohammad, Z., & Ismail, Z. (2018). Development and testing of hydraulic ram pump (hydram): Experiments and simulations. IOP Conference Series: Materials Science and Engineering, 440(1). DOI: https://doi.org/10.1088/1757-899X/440/1/012032
Krol, J. (1947). A critical survey of the existing information relating to the automatic hydraulic ram pump (London University). Recuperado de https://openresearch.surrey.ac.uk/esploro/outputs/doctoral/A-critical-survey-of-the-existing/99514364202346#file-0
Kimaro, S. J., & Salaam, D. (2018). The influence of air vessel volume on the delivery flow rate and efficiency of a hydram water pumping system. International Research Journal of Engineering and Technology, 5, 1312-1320.
Kweku, D., Bismark, O., Maxwell, A., Desmond, K., Danso, K., Oti-Mensah, E., Quachie, A., & Adormaa, B. (2018). Greenhouse effect: Greenhouse gases and their impact on global warming. Journal of Scientific Research and Reports, 17(6), 1-9. DOI: https://doi.org/10.9734/jsrr/2017/39630
Lansford, W. M., & Dugan, W. G. (1941). An analytical and experimental study of the hydraulic ram. Champaign, USA: University of Illinois at Urbana Champaign, College of Engineering.
Manzini, F., Islas, J., & Martínez, M. (2001). Reduction of greenhouse gases using renewable energies in Mexico 2025. International Journal of Hydrogen Energy, 26(2), 145-149. DOI: https://doi.org/10.1016/S0360-3199(00)00042-2
Najm, H. N., & Azoury, M. P. (1999). Numerical simulation of the hydraulic ram: A new look at an old device. A01198 © IMechE 1999. Proceedings of the Institution of Mechanical Engineers, 213(Part A, 213), 127-141.
Ngolle, E. E. G., & Hong, S. G. (2019). Experimental study on the effect of air chamber size and operation parameters on the performance of a hydraulic ram pump. Journal of the Korean Society of Agricultural Engineers, 61(4), 55-61. DOI: https://doi.org/10.5389/KSAE.2019.61.4.055
Pramono, B. A., Suharno, K., & Widodo, S. (2018). Analisis efisiensi pompa hidram paralel empat dengan diameter katup buang 1 inchi dan 1 1 / 4 inchi berdasarkan variasi pipa inlet. Jurnal Teknik Mesin MERC (Mechanical Engineering Research Collection), 1(2). Recuperado de https://www.semanticscholar.org/paper/ANALISIS-EFISIENSI-POMPA-HIDRAM-PARALEL-EMPAT-KATUP-ilham-Pramono/8fc876ec3df8e19d825cb74687dc7bcc196e6a6e?utm_source=direct_link
Rajaonison, A., & Rakotondramiarana, H. T. (2020). Experimental validation of a mathematical model of the operation of a hydraulic ram pump with a Springs system. American Journal of Applied Sciences, 17(1), 135-140. DOI: https://doi.org/10.3844/ajassp.2020.135.140
Rennie, L. C., & Bunt, E. A. (1990). The automatic hydraulic ram—experimental results. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 204(1), 23-31.
Rosenberg, D. M., Bodaly, R. A., Usher, P. J. (1995). Environmental and social impacts of large scale hydro- electric development: Who is listening ? Global Environmental Change, 5(2), 127-148.
Schiller, E. J., & Kahangire, P. (1984). Analysis and computarized model of the automatic hydraulic ram pump. Canadian Journal of Civil Engineering, 11(4), 743-750. DOI: https://doi.org/10.1139/l84-093
Silver, M. (1977). Use of hydraulic rams in Nepal: A guide to manufacturing and installation. Edition of book: UNICEF. Recuperado de https://www.ircwash.org/sites/default/files/232.5-77US.pdf
Sobieski, W., Lipin, S., & Grygo, D. (2020). An analysis of the conditions during the autonomous start-up of a water ram. DOI: https://doi.org/10.1007/s12046-020-1272-0
Sobieski, W., Grygo, D., & Lipiński, S. (2016). Measurement and analysis of the water hammer in ram pump. Sadhana, 41(11), 1333-1347.
Sobieski, W., & Grygo, D. (2019). Fluid flow in the impulse valve. Technical Sciences, 22(3), 205-118.
Steinmetz, M., & Sundqvist, N. (2014). Environmental impacts of small hydropower plants-a case study of Borås energi och Miljö’s hydropower plants. Gothenburg, Sweden: Chalmers University of Technology.
Suarda, M., Kusuma, I. G. B. W., Sucipta, M., & Ghurri, A. (2020). Investigation of tilt-angled delivery valve in hydraulic ram-experiment results. International Journal of Mechanical Engineering and Technology (IJMET), 11(2), 117-129.
Sucipta, M., & Suarda, M. (2019). Investigation and analysis on the performance of hydraulic ram pump at various design its snifter valve. IOP Conference Series: Materials Science and Engineering, 539(1). DOI: https://doi.org/10.1088/1757-899X/539/1/012007
Tacke, J. H. P. M. (1988). Hydraulic rams a comparative investigation. Recuperado de https://repository.tudelft.nl/islandora/object/uuid%3Afcdc050d-4500-4565-9fdc-b5d8afc3064b
Viccione, G., Immediata, N., Cava, R., & Piantedosi, M. (2018). A preliminary laboratory investigation of a hydraulic ram pump. Proceedings, 2(11), 687. DOI: https://doi.org/10.3390/proceedings2110687
Watt, S. (1975). A manual on the hydraulic ram for pumping water. Recuperado de https://api.semanticscholar.org/CorpusID:107668235
Young, B. W. (1998). Generic design of ram pumps. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 212(2), 117-124. DOI: https://doi.org/10.1243/0957650981536646
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Derechos de autor 2024 Tecnología y ciencias del agua

Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-CompartirIgual 4.0.
Por Instituto Mexicano de Tecnología del Agua se distribuye bajo una Licencia Creative Commons Atribución-NoComercial-CompartirIgual 4.0 Internacional. Basada en una obra en https://www.revistatyca.org.mx/. Permisos que vayan más allá de lo cubierto por esta licencia pueden encontrarse en Política editorial